Ronstan 30QT 2-Speed QuickTrim E1 12V Orbit Winch

The Ronstan 30QT Orbit Winch delivers smooth, efficient sail handling with 2-speed electric control. In addition to the host of standard features that have made Andersen self tailing winches the benchmark for quality and performance, Andersen E1 Electric Winches are engineered with unsurpassed levels of functionality, monitoring and protection.

Andersen E1 Electric Winches allow effortless sail trimming at the push of a button, making sailing easier for all crew members.

Illuminated “intelligent” Push Button E1 winches are supplied with a push button with integrated LED which illuminates when power to the winch system is on. The push button incorporates a hinged safety cover to prevent inadvertent winch operation and is water resistant rated to IP67.

The push button also acts with the controller to flash status codes that assist with trouble shooting in the event of overload or where other system protection intervention occurs. A cable for connection of the push button is included for convenient installation.

Ideal for cruising and racing yachts, the Ronstan 30QT Orbit Winch enhances efficiency and ease of use, making it an essential addition to any modern sailing setup.

Features:

• Unrivalled level of monitoring and protection
• Integrated Overload Protection - The controller is pre-set to stop the winch if the Maximum Pull Load is exceeded. Operation can resume within a few seconds when the load returns below the limit
• Thermal Overload Protection – The motor is fitted with a thermal cutout that disables the motor in case of overheating; it automatically resets after the temperature returns to normal.
• Reverse Polarity Protection – An integrated 5 Amp fuse protects the motor against incorrect cable connection.
• Accidental Start Protection – Winch operation is disabled if the push button is already inadvertently pressed when the power supply is turned on at the circuit breaker or battery.
• Low Voltage Detection - Operation is disabled if the battery charge level is low, which prevents further drain on batteries and avoids triggering low-voltage reset of navigation instruments and other electronic devices.
• Continuous Run Time Limit– Operation is disabled if continuous run time exceeds 10 minutes.
• Manual operation
• 2-speed manual operation is always available as a backup; to winch beyond the pre-set maximum pull load (but below the winch Max Working Load) or just for the experience.

Specification Details:

• Base "B" Ø (mm): 136
• Drum "D" Ø (mm): 86
• Height "H" (mm): 182
• J Motor Depth (mm): 182
• K Max Deck (mm): 48
• Line Entry "L" (mm): 74
• N Motor Length (mm): 300
• S Gear Length (mm): 65  

Product Code:RA630201100